Clay Paky A.LEDA WASH K20 - Manual (Page 19)

RGB
Gamma
Halogen
Mode
19 A.LEDA WASH
SILENT MODE
Lets you set an operator mode choosing from the two available:
• Standard: Maximum speed and consequently maximum effect and
fan noise.
• Quiet: reduces the speed of some effects and fans thus also
reducing noise.
FAN SPEED MODE
Allows you to set how to manage the fan speed of the head of the fixture,
select between the two available:
• Auto: the head’s fan varies the speed/power depending on the tempe-
rature detected on the LED.
• Full: the head’s fan is always at full speed/power.
DISPLAY
Used for automatically reduce brightness on the display after about 30
seconds in idle.
1) Press
F - the current settings appear on the display (On or Off).
2) Use the UP B and DOWN C keys to enable (On) or disable (Off) the
decreasing of display brightness.
3) Press F to confirm the selection or LEFT D to keep current settings.
SPECIAL FUNCTIONS
Pan / Tilt speed
Lets you select two different Pan and Tilt speeds.
1) Press
F - the current setting appears on the display.
2) Use the UP B and DOWN C keys to select one of the following
settings:
- Normal
- Fast
3) Press F to confirm the selection or LEFT D to keep current settings.
Dimmer Curve
Lets you select four different Dimmer channel curves.
1) Press
F - the current setting appears on the display.
2) Use the UP B and DOWN C keys to select one of the following
settings:
- Curve 1
- Curve 2
- Curve 3
- Curve 4
3) Press F to confirm the selection or LEFT D to keep current settings.
RGB Gamma
Lets you select three different RGBW gamma curves.
1) Press
F - the current setting appears on the display.
2) Use the UP B and DOWN C keys to select one of the following
settings:
- Gamma 1.0
- Gamma 1.5
- Gamma 2.0
3) Press F to confirm the selection or LEFT D to keep current settings.
Halogen Mode
Lets you select five different halogen lamp simulations.
1) Press
F - the current setting appears on the display.
2) Use the UP B and DOWN C keys to select one of the following
settings:
- Halogen OFF
- Halogen Lamp 1
- Halogen Lamp 2
- Halogen Lamp 3
- Halogen Lamp 4
- Halogen Lamp 5
3) Press F to confirm the selection or LEFT D to keep current settings.
Special
Functions
Pan / Tilt
speed
On
Off
Display
Silent
mode
Standard
Quiet
Option
Dimmer
Curve
Fan Speed
Mode
Auto
Full
Continue ➔