Cino FA470 - Manual (Page 13)

F
u
z
z
y
S
c
a
n
F
ix
e
d
M
o
u
n
t
S
c
a
n
P
ro
g
ra
m
m
in
g
M
a
n
u
a
l
7
Operation Mode linear fixed mount scanner
The details of each operation mode supported by FM480 fixed mount scanner are listed below.
Trigger Mode
Under trigger mode, the scanner will turn on the light source to read barcode when it receives an external trigger or a serial
trigger ON command. Once the external trigger has been released, or the scanner gets a good read or a serial trigger OFF
command, the scanner will stop reading and wait for the next trigger to activate scanning again.
Alternative Mode
When the scanner receives an external trigger or a serial trigger ON command under alternative mode, the scanner will turn
on the light source to read barcodes until the preset scan input time-out is up. The scan input time-out will be reset after
each good read. Once the light source goes off, the scanner is waiting for the next trigger to activate scanning again.
Level Mode
When the scanner receives an external trigger or a serial trigger ON command under level mode, the scanner will turn on the
light source to read barcodes until a good read is performed or the preset scan input time-out is up. Once the light source
goes off, the scanner is waiting for the next trigger to activate scanning again.
Presentation Mode
Under presentation mode, the scanner will automatically detect the object movement in the scanner field of view. Once the
scanner detects an image similar to a barcode, it will turn on the light source to scan until the preset scan input time-out is
up. For dark environments, you may adjust the setting of “Presentation Sensitivity” to increase the detection sensitivity.
Force Mode
Under force mode, the scanner continues to read barcodes without using external trigger or serial trigger. Please note that
the scanner will not stop reading until you switch to another operation mode.