Bonaire Comfort Control - RF/LV - Manual (Page 31)

Multi-Appliance Comfort Control
Ducted Evaporative Air Conditioning
USING YOUR COMFORT CONTROL
Your Comfort Controller can be used to operate your ducted evaporative air conditioner 3 ways being
Manual, Auto and Timer modes.
M ANUAL M ODE
Using the Comfort Control to manual operation the fan and pump without using timers or programming.
1. Turn the comfort control ON, press and release the ON/OFF button. If there is only an evaporative
ducted air conditioner fitted the control will default to COOL FRESH AIR.
NOTE: Your Comfort Controller is designed to automatically detect the appliances you have installed.
Controller options not required for your appliances will usually not be visible on your Comfort Control
display. So don't worry if you don't see all the menu items listed in this book.
2. Press the MANUAL/AUTO button until MANUAL is displayed.
3. Press the HEAT/COOL/FRESH AIR button until FRESH AIR
appears at the top of the screen for fan only
or
COOL FRESH AIR appears at the top of the screen for pump
and fan operation.
4. Press & hold the ▼ or ▲ buttons to decrease or increase FAN
SPEED on step at a time.
5. To turn the unit OFF press the ON/OFF button.
A UTO M ODE (T HERMOSTAT )
Using your Comfort Control for thermostatic operation of the fan
speed and the pump operation.
1. Turn the comfort control ON by pressing and releasing the
ON/OFF button. If there is only an evaporative ducted air
conditioner fitted the control will default to COOL FRESH AIR.
2. Press the MANUAL/AUTO button until AUTO is displayed.
3. Press & hold the ▼ or ▲ buttons to decrease or increase the
temperature. Less bars = cooler, more bars = warmer.
• Set the temperature scale to a relative point where you
feel comfortable.
• The fan will now be adjusting itself up and down
according to need automatically.
• As the room temperature nears the selected relative
temperature the water pump will turn off with the fan still
running. The fan will only stop if the room temperature is
more than 1 degree below the required relative
temperature.
4. To turn the unit OFF, press the ON/OFF button.
Comfort Control - PNE
Page 31