Dynaudio SERIES 2 ESOTEC - Manual (Page 3)

Esotec / Esotar 2 Series 3
About this installation manual
This installation manual provides all technical specifications, installation dimensions and crossover connection
instructions for the Dynaudio Esotec and Esotar
2 series. To realize the full potential of Dynaudio Automotive
systems, some areas should be addressed, as touched upon in the following pages.
Due to the great variety of installation conditions it will not offer specific instructions how to install the systems
into your car. Please refer to the operating manual of your vehicle or ask your local automotive dealer for further
assistance. To observe all relevant matters and thus maximize the tremendous performance potential of your
Dynaudio in-car loudspeaker system, consult your authorized Dynaudio Automotive loudspeaker dealer for
assistance. Your dealer has the knowledge and expertise to perform a high quality aftermarket installation.
Safety information
As all Dynaudio Esotec and Esotar 2 Series components are passive (in that they rely on external amplification),
the components themselves can not cause any damage.
However, the components can be damaged beyond repair unless a few ground rules are observed:
X Insure all components are properly installed and wired correctly.
X Observe the technical specifications.
X Always use high-quality cabling and amplification.
CAUTION
HIGH SOUND PRESSURE LEVELS
Listening to high sound pressure levels over a prolonged period of time
may harm your hearing.
X To avoid auditory effects do not listen to high sound levels over a long period of time.