AValon RF DX-02 Series - Manual (Page 19)

AVALON RF, INC. Page 16 of 20
DX402/DX502/DX602 User’s Guide & Operating Manual
4.7 Optional accessories
4.7.1 Antennas.
Each receiver requires two (2) antennas. Higher antenna gain yields
longer range with limitations on reception “viewing angle”.
Ordering information:
Description DX402 DX502 DX602
2dbi Omnidirectional AX402 AX502 AX602
2dbi omni circular polarized AX602R
5dbi Omnidirectional AX405 AX505 AX605
6dbi hemispheric patch AX406 AX506
9.5dbi panel antenna AX609
10dbi circular polarized(RH) patch AX610R
10dbi circular polarized(LH) patch AX610L
11dbi log periodic antenna AX411
13dbi panel antenna AX513 AX613
15dbi panel antenna AX615
18dbi panel antenna AX618
24dbi parabolic antenna AX624
4.7.2 Antenna cables.
These cables connect the receiver to its antennas. If a system
requires splitters, these cables connect the antennas to the splitters.
DX602: Times Microwave LMR-240 50 Ω (ohm) or equivalent are
recommended for runs up to 30ft and LMR-400 50 Ω (ohm) for runs
from 20ft to 50ft.
Ordering Information:
Length
DX402/DX502
F-F/75 Ω (ohm)
DX602
N-SMA/50 Ω (ohm)
5’ CBLFF-5 CBLNS-5
15’ CBLFF-15 CBLNS-15
30’ CBLFF-30 CBLNS-30
50’ CBLFF-50 CBLNS-50