Mpc probe control, Ultrasound output connector – Dukane ULTRASONIC GENERATOR/POWER SUPPLY 403-573-02 User Manual
Page 28
Page 22
iQ Series,
Auto User’s Manual
Dukane Manual Part No. 403-573-02
NOTE
Ultrasound Output Connector
The ultrasound output connector
used with all standard generators is
a high voltage (5000V) coaxial style
SHV-BNC connector. This connector
provides superior shielding of electri-
cal noise, compared to other types
of connectors. The ultrasound output
connector mates with fully shielded
coaxial ultrasound cables that are
secured with a simple and reliable
quarter-turn bayonet style attachment
mechanism.
The ultrasonic output from this con-
nector (that drives the attached
ultrasonic load) is a very high AC volt-
age (1200VAC). At high power levels
this can exceed 2 amps of current and
must be securely terminated via the
ultrasound cable for safe operation.
Use original equipment ultrasound
cables for safe and reliable system
operation. Improperly assembled
ultrasound cables can result in high
voltage arcing and will destroy the
ultrasound connectors.
MPC Probe Control
When the optional MPC Interface and MPC I/O
connectors are used, the generator has the capability of
controlling as many as sixteen compatible probes. One
probe can be turned on at a time while the sequence
of probe activation is determined by the user’s
automation.
The table below shows how the setup bit inputs
correspond to the probes.
MPC
Probe
Selected
3
2
1
0
Off
Off
Off Off
1
Off
Off
Off On
2
Off
Off
On Off
3
Off
Off
On On
4
Off
On Off Off
5
Off
On Off On
6
Off
On On Off
7
Off
On On On
8
On
Off
Off Off
9
On
Off
Off On
10
On
Off
On Off
11
On
Off
On On
12
On
On Off Off
13
On
On Off On
14
On
On On Off
15
On
On On On
16
Table 3-III MPC Setup Bit Inputs