Angelcare AC403 User Manual

Page 8

STEP 4 - TURNING ON YOUR MONITOR

1) Press the Parent Unit ON/OFF button

for 2 seconds.

2) Slide ON the Nursery Unit Power

ON/OFF button.

NOTE:

The screen of the Parent Unit will show
the channel of transmission (C1 to C8) and
after 5 seconds the room temperature and
function icons.

The connecting process should be done
within 30 seconds. If this sequence is not
completed within 30 seconds you will need
to switch the units off and start again.

CHANNEL SELECTION

When the Parent Unit is turned
ON and the Nursery Unit is OFF:

• No channel icon will appear

on the screen but the Nursery
Unit icon will blink.

• After 1 minute the Parent Unit

will start to beep. The Parent
Unit will continue to beep
for 5 seconds and then shut
itself off.

1) Press and hold the select button

to enter the channel mode.

2) Pressing either the UP or DOWN arrow

will change the channel your monitor
transmits on. (C1 to C8)

3) Press the select button again

to confirm your channel selection.

NOTE :

If the transmission is not clear, or if you hear

interference sounds, you should change

the channel.

TO SELECT THE CHANNEL:

If there is a lost connection
between the 2 units
(refer to troubleshooting):

• The Out-of-range icon

(if activated) will blink
on the screen and the
Parent Unit will beep.

SOUND TRANSMISSION (VOX)

Nursery Unit:

Appears when options are being
set for the Nusery Unit

Out-of-Range:
Indicates the loss of connection
between the Parent Unit and
Nursery Unit.

Parent Unit:
Appears when options are being
set for the Parent Unit

Temperature Display:
Indicates room temperature

Low Temperature:
Appears when low temperature
alert is ON

High Temperature:
Appears when high temperature
alert is ON

Channel Display:
Indicates selected channel

Alarm mode icons:
Indicates selected alarm mode

Sound alarm

and vibration

Vibration only

Volume/VOX sensitivity Level:
Indicates the volume and
VOX sensitivity level.

IMPORTANT ICONS

Detection Mode Icons:
Indicates selected dectection mode:

Movement Only

Sound only

‘TIC’, Sound & Movement

Sound & Movement

‘TIC’ & Movement

Battery Level icon:

Indicates battery level

Empty

1/2 Full

Full

Charging