Angelcare AC403 User Manual
Page 5
STEP 1 - CHARGING THE PARENT UNIT (15 HOURS)
2
3
1) Remove the battery cover and insert
the Rechargeable Batteries (included).
2) Connect the AC Adapter to the Parent
Unit and into an electrical outlet.
3) Charge the unit for 15 continuous hours
(prior to first use).
NOTE:
To optimize your battery performance
please refer to Battery Guidelines in the
Trouble Shooting section.
15
IMPORTANT
Never use regular
alkaline batteries
in the Parent Unit;
they may explode.
1
1.1 - BATTERIES
HOW TO CHECK THE BATTERIES:
Unplug the AC Adapters from both units.
• If the Nursery Unit
Power Indicator
does not show or if the Low Battery
Indicator does show, replace
the batteries.
• If the Parent Unit screen does not
light up or it switches off, recharge
the batteries.
HOW TO CHARGE THE BATTERIES
IN THE PARENT UNIT:
Plug the AC into the Parent Unit and
a working electrical outlet. Your Parent
Unit can function with the batteries
at 1/2 capacity but it is recommended
that they are fully charged before
unplugging from the AC Adaptor
and power outlet for maximum use.
PARENT UNIT BATTERY ALARM
• Alarm activates when batteries need to be recharged.
• Parent Unit will emit a beep sound every 15 seconds.
• Battery Alarm icon will show on screen.
The Power Indicator
on the Nursery Unit
The Low Battery Indicator
on the Nursery Unit
empty
1/2 full
full
PARENT UNIT:
Front View
Rear View
E
G
H
I
C
D
A) LCD Screen
B) Power ON/OFF
C) MENU Button
D) Channel Button
E) Sound Volume
UP/DOWN and HOLD
F) Speaker
G) Belt Clip
H) Battery Cover
I) AC Adapter Outlet
F
B
A
9
8