Angelcare AC403 User Manual

Page 11

ADJUST THE SOUND LEVEL

PUT IN TEMPORARY MUTE MODE

Raise volume

Lower volume

Press the

SOUND/OFF

button once to mute
the sound
(see section 5.6).

TO ADJUST SOUND SENSITIVITY (VOX):

The sensitivity of the microphone is adjustable and has 4 levels (the most sensitive is
level 4). This means that sound will only transmit based on the level that you set.

5.6 - TEMPORARY MUTE

Allows you to put your monitor
in temporary

MUTE mode.

TO ACTIVATE MUTE:

Press the

SOUND/OFF button.

TO DEACTIVATE MUTE:

Press the

SOUND/OFF button again

to hear sounds.

NOTE:

The Sound Icon will blink
on the Parent Unit whilst
the Temporary MUTE
is activated.

After 2 minutes the sound function
will be automatically reactivated.

If you press too long on the
SOUND/OFF button it will shut
down the Parent Unit.

1) Press MENU button 3 times.

Sensitivity Level icon will appear.

2) With the arrow keys select desired

microphone sensitivity level.

3) Press SELECT button to confirm

your choice.

VOX
Sensitivity
Level
(4 levels)

1) Press and hold the Down Volume

arrow for 2 seconds.

The Hold Icon will appear on the screen.
The Parent Unit will emit a double beep
every minute to remind you that your
monitor is on

HOLD.

2) To deactivate this function, press

and hold the

Down Volume arrow

for 2 seconds.

5.7 - ALARM SETTINGS

Allows you to select your preferred
alarm mode.

IMPORTANT
Vibration option will work when the
following alarm functions are activated:

• Out-of-range
• Temperature alert
• No movement detection

for 20 seconds.

Sound alarm will replace vibration
mode when the Parent Unit
is charging.

Sound alarm

Sound alarm
and vibration

Vibration only (the alarm will
not sound on Parent Unit but
it will on Nursery Unit).

1) Press MENU button 4 times.

The Nursery Unit
Indicator blinks.

2) Using the arrows, select

the desired alarm mode.

NOTE:

Vibration mode not available in some countries.

5.8 - HOLD

Allows you to put your Angelcare monitor on HOLD.

IMPORTANT
When your monitor is in

HOLD mode, the movement alarm will not go off and the sound

will not be transmitted. When your monitor is in Sound only mode, the

HOLD function

cannot be activated.

IMPORTANT
When your monitor is on

HOLD, the movement-detection feature and movement alarm

are disabled.

IMPORTANT
When in MENU or SUB-MENU mode

NO sound, alarm or vibration will be emitted

from either the Parent Unit or the Nursery Unit even if they were activated before
pressing the MENU or SUB-MENU mode.