Angelcare AC701 User Manual
Page 9
TO STOP THE ALARM
Place your
hand back
on the mattress.
Press Nursery
Unit’s Hold button
(see step 6.5)
Hold down left ‘wing’
button for two seconds
to turn OFF the Unit
OR
OR
1) Press Settings icon to access setting mode.
2) Press Movement Sensitivity icon.
The icon will blink.
3) Use the (+) or (-) on the right side of
the Parent Unit to choose the desired
sensitivity level (1 to 5)
OR press the
movement sensitivity icon
to choose the desired sensitivity level.
4) Press Return icon to confirm your choice
and return to normal screen.
TO ADJUST THE SENSOR PAD SENSITIVITY LEVEL:
TO ACTIVATE THE TIC FUNCTION:
This allows you to hear a ‘TIC’ sound with baby’s movements
(when the movement detection is ON)
1) Press TIC icon to activate
or
deactivate the ‘TIC’ function.
ON
OFF
If the TIC icon is activated a regular TIC
sound will emit from Parent Unit.
IMPORTANT
• The Sensor Pad is not designed for use with adults, children or infants older
than 24 months.
• Once you are finished using the Sensor Pad, please remove it from the baby’s
crib and store it away.
NOTE:
If you are receiving false alarms,
adjust the sensitivity level.
NOTE:
When the Movement Mode
is set to OFF, the TIC Mode
is automatically set to OFF.
NOTE:
Whilst in Setting mode, if after 30 seconds
no adjustments are made, the unit will go back
to normal and no update will be done.
1
2
4
1
3
Level 1
Level 2
Level 3
Level 4
Level 5
Press any key on
the Parent Unit
to put on Hold
(see step 6.5)
NOTE:
When using ECO mode, the TIC function
shuts off.
TO TEST THE SOUND:
Ask someone to speak into the Nursery
Unit or place the unit near a radio to ensure
that sound is being picked up.
TO ADJUST THE SOUND:
5.2 - SOUND
HOW TO CHECK THE BATTERIES:
Unplug the AC Adapters from both units.
• If the green light on the Nursery Unit does not show, replace the batteries.
• If the Parent Unit and its screen do not light up, recharge the batteries.
IF YOU HEAR NO SOUND:
• Check that both units are switched on.
• Check that both units are plugged
into a working electrical outlet.
• Check the batteries in both units
(replace or recharge them as necessary
per unit).
• Bring the Parent Unit closer to the
Nursery Unit.
IMPORTANT
To avoid feedback (whistling), keep
both units at least 3 m apart.
HOW TO CHARGE THE BATTERIES IN THE PARENT UNIT:
Leave the Parent Unit in the Charging Cradle
to fully charge the unit. Although the batteries
at 1/3 capacity works normally, we recommend
that you fully recharge them.
1/3 full
2/3 full
full
PARENT UNIT BATTERY ALARM
• Alarm activates when batteries need to be recharged.
• Parent Unit will emit a beep sound every 20 seconds.
• Battery icon will flash on Parent Unit screen.
Press + or - buttons to adjust
the volume level.
Level 0
Level 1
Level 2
Level 3
Level 4
Level 5
TO LOWER VOLUME LEVEL TO L0
PUT IN TALK BACK MODE
Raise volume
level (+)
Lower volume
level (-)
Press the
(-) button
to select the
L0 level
(see step 6.6)
Press and hold
the Talk Back
button to speak
to your baby.
5.3 - BATTERIES
NOTE:
At level L0 the level bar will still appear on
the screen and the icon will blink. If you press
the blinking sound icon again, it automatically
activates the Mute function. The Bar will disappear
and a cross will appear in the icon screen.
To DEACTIVATE, press the sound icon again.
(Refer to 6.6 for more information on Mute mode).
17
16