Setup requirements – Angelcare AC701 User Manual

Page 5

IMPORTANT
Place the crib near a supporting wall and
far from air currents. Install the Nursery
Unit on a flat, stable surface facing the
crib at a distance of at least 1 meter.

YOU MUST PREPARE:

One hardboard (not included)
Thickness:

6 mm

Minimum dimensions:
33 cm x 33 cm
Maximum dimensions:
equal to the mattress size

WHAT YOU WILL NEED (NOT INCLUDED):

TOUCHSCREEN MOVEMENT
& SOUND MONITOR

Model AC701

IMPORTANT
The hardboard must be larger than the
Sensor Pad surface area or in the case
of the AC701-2SP of two Sensor Pads.

BABY’S ROOM:

SETUP REQUIREMENTS

INCLUDED:

Rechargeable

Parent Unit

Charging Cradle

2 AC Adapters

Nursery Unit

2 AAA Rechargeable

Batteries

for Parent Unit

Belt Clip

Miniature Phillips

Screwdriver

2 AA Alkaline

Batteries

for Nursery Unit

1 Sensor Pad (AC701) or 2 Sensor Pads (AC701-2SP)

with pre-installed cord covers

Hardboard

Sensor Pad

IMPORTANT

Keep

at least

1 m

apart

STEP 1 - CHARGING THE PARENT UNIT (15 HOURS)

1) Slide the button to unlock and open the

battery cover. Insert the Rechargeable
Batteries (included) as per picture.

2) Connect the AC Adapter to the Parent

Unit and into an electrical outlet.

3) Charge the unit for 15 continuous

hours (prior to first use).

NOTE:

To optimize your battery performance please
refer to Battery Guidelines in the Trouble
Shooting.

WARNING
Never use regular
alkaline batteries
in the Parent Unit;
they may explode.

PARENT UNIT:

Front View

Right Side View

A) LCD Touchscreen

B) POWER ON/OFF

C) Microphone

D) Speaker

E) Charging Cradle

F) Belt Clip

G) Speaker

Volume Buttons

H) Talk Back Button

I) Battery Cover

(not shown)

J) AC Adapter Outlet

(not shown)