Angelcare AC701 User Manual
Page 12
TO SET TEMPERATURE RANGE:
TO ACTIVATE THE TEMPERATURE ALARM:
1) Press the Settings icon to access
setting mode.
2) Press the Temperature Alarm icon.
3) High Temperature (SUN) icon will blink,
press (+) or (-) to set the
high
temperature alarm (22 to 35 °C).
4) Press the Temperature Alarm icon again.
5) Low Temperature (SNOWFLAKE) icon
will blink, press (+) or (-) to set
low
temperature alarm (5 to 19 °C).
6) Press the Return icon to confirm
your choice and return to normal screen.
High
Temperature
Low
Temperature
3
1
1
2
4
5
6
1) Press the Temperature Alarm icon
to
activate or deactivate the high
and low temperature alarm.
ON
OFF
6.4 - ALARM
Allows you to select your preferred alarm mode for the Parent Unit.
1) Press the Settings icon to access
setting mode.
2) Press the Alarm icon, current alarm mode
icon will blink. Then press again to select
the alarm mode as the display changes
for various modes.
3) Press the Return icon to confirm your
choice and return to normal screen.
IMPORTANT
When in setting mode no sound or alarms will transmit to the Parent Unit,
except the movement alarm (if this function was already activated).
When the Parent Unit is on
the charger, the sound alarm will
replace the vibration mode.
Sound alarm only
Vibration only:
When the movement alarm is triggered, the Parent Unit will vibrate
and a sound alarm will be heard on the Nursery Unit.
1
2
3
Sound alarm
and vibration
6.5 - HOLD
Allows you to put your Angelcare Monitor on HOLD.
1) Press the Setting icon to access
the setting mode.
2) Press the Hold icon
OR
Press the
Nursery Unit Hold button
for 4 seconds.
3) Press the Hold icon for 4 seconds or
the
Nursery Unit Hold button again
to return to normal operation.
NOTE:
When on HOLD, the Nursery Unit Power Light will
blink. The Parent Unit will emit beeps and/or vibrate
every 20 seconds to remind you that monitor is on
hold, depending on the type of alarm chosen.
IMPORTANT
When your monitor is on hold, the movement feature and Movement alarm are disabled.
1
2
2
TEMPERATURE ALARM
• Alarm activates when the temperature reaches a maximum or minimum
set temperature.
• Parent Unit will emit 3 consecutive beeps and/or vibrate every 5 seconds
depending on the type of alarm chosen.
• Temperature Alarm icon will show on LCD screen with the Low/High
icon blinking.
23
22