Amplicom Amplifyz TCL Pulse Bluetooth Enabled Alarm - Manual (Page 19)

Reset the Vibration Alarm
12. Reset the Viration Alarm
After reset, all data in the
vibration alarm is deleted.
And you need to press
and hold the [PAIR] button
again to re-pair the vibration
alarm. If it has been paired
previously with the same
i-device, you can select
“Restore” to restore all
setting and data or select
“Erase” to start all from
scratch.
If the vibation alarm is not
working properly, press
RESET button with a
pointed object, the LED
flashes twice in (purple)
color and the vibration box
vibrates twice meanwhile.
Then the LED will flash
once per 6 seconds in
red color.