Ambir ImageScan Pro 940u - Manual (Page 11)

Ambir ImageScan Pro
TM
940u Quick Start Guide
11
1. Open the ADF cover by pulling the cover open lever.
2. Remove the pad module by pinching both sides of the pad
module. Pull it out.
3. Install the new pad module by inserting the tabs on the
module onto their slots on the scanner.
4. Close the ADF cover by pushing it back down until it snaps
back into place.
Replacing the Pad Module
Clearing Paper Jams
If a paper jam in the ADF happens, please perform the following
steps:
1. Remove any unjammed documents still loaded into the ADF.
2. Open the ADF cover by pulling the cover open lever.
3. Gently but fi rmly pull the jammed documents out of the ADF.
Try to avoid creasing or wrinkling the documents.
4. Close the ADF cover by pushing it back down until it snaps
back into place.