Altech UEC Integrated 32'' LED/LCD HD TV - Manual (Page 33)

• SETUP MENU
SETUP MENU
Press the ▲ / ▼to select Setup then Press OK or ►
to enter.
Press ▲ / ▼
set in the Setup Menu (OSD Timer→ PC Setup→
HDMI Mode→ Blue Screen→ Aspect Ratio → Reset
TV Setting→ Software Upgrade) then Press OK or ►
to enter.
OSD (On Screen Display) TIMER
Press the
▲ / ▼ to select OSD then press OK
or ► to enter.
Press ▲ / ▼
10 sec→ 15 sec→ 20 sec → 25 sec → 30 sec →
Never) then Press OK or ► to confirm selection.
Info: OSD Timer is the time you set for the On Screen
Display before it times out.
PC SETUP
Press the ▲ / ▼
OK or ► to enter. Select the following options
available:
Auto Adjust: Press OK or ► to auto adjust
H Position/V Position: Press OK or ► to enter and
use ◄►to adjust the level (-16 to +16)
and press OK to confirm selection.
Phase: Press OK or ► to enter and use ◄►to adjust
the level (0 to +63) and press OK to confirm
selection.
Clock: Press OK or ► to enter and use ◄►to adjust
the level (-50 to +50) and press OK to confirm
selection.
HDMI Mode
Press the ▲ / ▼to select HDMI then press OK or►
to enter. Select Under Scan or Over Scan then press
OK or ► to confirm selection.
NOTE: PC Setup/HDMI Mode menu is only available
if a VGA/HDMI inputs are connected to the TV.
BLUE SCREEN
Press the ▲ / ▼ to select Blue Screen then press OK
or ► to enter. Select ON or OFF then press OK or ►
to confirm selection
to select PC Setup/HDMI then press
to select the options available (5sec->
to select the option that you want to
For assistance:
[email protected]
www.uec.com.au
Altech UEC, 2014 33