Altech UEC Integrated 32'' LED/LCD HD TV - Manual (Page 13)

There are several methods in changing channels.
• Press / buttons on the remote or on the bottom of the TV to change the channel
to the next/previous channel.
• Via Numeric Keypad – Press the appropriate number to tune to the desired channel. For 2 digit DTV
channels, press the -/-- button followed by the numbers to tune to the channel.
• Via TV Guide (EPG) – press TV Guide button on the remote then use the ↑ / ↓ navigation arrows to
select a channel and press OK to tune. Press EXIT to view the channel.
Press / buttons on the remote or on the bottom of the TV to increase/decrease the volume level.
Press button on the remote to enable . Press again to disable.
TV a
Record: In DTV mode, press the RECORDER ( ) button on the remote to record the program you are
currently watching.
Timeshift: In DTV mode, press PLAY/PAUSE ( ►II) button on the remote to start timeshift, then press
PLAY/PAUSE ( ►II) button again to resume watching.
The front panel LED indicator starts flashing GREEN and RED alternately during recording and
timeshifting.
For assistance:
[email protected]
www.uec.com.au
Altech UEC, 2014 13
Insert a high quality and high speed flash drive into the USB slot on the side connection panel for DTV.