ADLINK Food-D19 IP69k - Manual (Page 21)

Document:
Manual_Giant_Food_Series.docx Page 21 of 47 pages Last change date: 25-Oct-11
7.3.6. Super IO Configuration
•
Serial Port n Configuration
Use the Serial Port n Configuration menu to configure the serial port ‘n’.
•
Serial Port
Use the Serial Port option to enable or disable the serial port.
•
Disabled Default for
Port 1
Disable the serial port
•
Enabled Default for
Port 0,2,3
Enable the serial port
•
Change Settings
Use the Change Settings option to change the serial port IO address and interrupt
address. The assortment of settings differs according to the selected Serial Port.
Possible settings will not be listed below. The default setting is [Auto].
•
Auto Default
The serial port IO address and interrupt
address are automatically detected.