2 south bridge configuration, Restore ac power loss, Azalia controller – ADLINK STC-15W04 User Manual

Page 52: Select usb mode, Uhci #1 (ports 0 and 1), Uhci #2 (ports 2 and 3)

BIOS

4.5.2

South Bridge Configuration

Restore AC Power Loss

Select AC power state when power is re-applied after a power
failure. Set this value to Power Off, Power On, Last State.

Azalia Controller

Select a OnBoard Azalia Configuration. Set this value to Dis-
abled, HD Audio.

Select USB Mode

Select USB mode to control USB ports. Set this value to By
Ports, By Controllers.

UHCI #1 (ports 0 and 1)

Control the USB UHCI (USB 1.1) functions. Disable from high-
est to lowest controller. Set this value to Disabled, Enabled.

UHCI #2 (ports 2 and 3)

Control the USB UHCI (USB 1.1) functions. Disable from high-
est to lowest controller. Set this value to Disabled, Enabled.