4 ide configuration, Sata controller(s), Configure sata as – ADLINK STC-15W04 User Manual
Page 40: Port0 speed limit, Port1 speed limit, Sata port 0
32
BIOS
4.4.4
IDE Configuration
SATA Controller(s)
Enable/Disable SATA Device.
Configure SATA as
Select a configuration for the SATA Controller. Set this value to
IDE, AHCI.
Port0 Speed Limit
Select the Port0 AHCI Speed Limit. Set this value to No Limit,
GEN1 Rate, GEN2 Rate.
Port1 Speed Limit
Select the Port0 AHCI Speed Limit. Set this value to No Limit,
GEN1 Rate, GEN2 Rate.
SATA Port 0
Enable or Disable the SATA Port. Set this value to Disabled,
Enabled.