ADLINK MCS-2040 - Manual (Page 42)

42
MCS-2040
5.7 Boot Setup
Select the Boot tab from the setup screen to enter the Boot BIOS Setup screen. You can
select any of the items in the left frame of the screen, such as Boot Device Priority, to go to
the sub menu for that item. You can display a Boot BIOS Setup option by highlighting it using
the < Arrow > keys. The Boot Settings screen is shown below:
Setup Prompt Timeout
Set the number of seconds that the system will wait for the setup activation key. The
number of 65535(0xFFFF) means indefinite waiting.
Bootup NumLock State
Select the keyboard NumLock state. Set this value to On, Off.
Quiet Boot
Disabled
- Set this value to allow the computer system to display the POST
messages.
Enabled
- Set this value to allow the computer system to display the OEM logo.