beautypg.com

5 reinserting a node tray into the chassis, Reinserting a node tray into the chassis – ADLINK MCS-2040 User Manual

Page 18

background image

18

MCS-2040

2. Secure the mSATA modules to the node with 2 screws provided with the module.


3.5 Reinserting a Node Tray into the Chassis

1. Carefully insert the node tray into the chassis, checking that the sides of the tray are

aligned with guides in the chassis.

2. Slowly push the tray into the chassis until it is fully inserted. Press firmly until the

locking tab makes a clicking sound.

See also other documents in the category ADLINK Hardware: