ADLINK NuPRO-E320 - Manual (Page 81)

BIOS Setup 67
NuPRO-E320
5.7.2 South Bridge Configuration
You can use this screen to select options for the South Bridge
Configuration. Use the up and down keys to select an
item. Use the and keys to change the value of the
selected option.
HDA Controller
Set this value to Enable/Disable the HDA Controller.
Restore on AC Power Loss
Determines which state the computer enters when AC power is
restored after a power loss. The options for this value are Last
State, Power On and Power Off.
X Power Off: Set this value to always power off the system
while AC power is restored.
X Power On: Set this value to always power on the system
while AC power is restored.
X Last State: Set this value to power off/on the system
depending on the last system power state while AC power
is restored.