ADLINK NuPRO-E320 - Manual (Page 49)

Driver Installation 35
NuPRO-E320
4 Driver Installation
This chapter provides information on how to install the
NuPRO-E320 device drivers under Windows XP. The device
drivers are located in the following ADLINK All-in-One DVD
directories:
4.1 Intel
®
Q45 Express Chipset Driver
This section describes the installation of the Intel® Q45 Express
chipset driver.
1. Locate the directory
X:\NuPRO\NuPRO-E320\Chipset\ from the ADLINK
All-in-One DVD, select the operating system, then start
the installation by double-clicking infinst_autol.exe.
2. When the initial installation window appears, click Next
to display the license agreement. When prompted, click
Yes to continue.
3. Click Next on the Readme information screen to begin
installing the driver.
4. When installation is complete, click Finish. Restart the
system when prompted.
5. After restart, follow screen instructions to complete
installation. Windows displays a found new hardware
window and automatically installs the required drivers. If
the New Hardware Found dialog box appears and
prompts you to locate the location of the drivers, browse
to the relevant directory.
6. Restart the system when prompted.
Chipset Driver \NuPRO\NuPRO-E320\Chipset\
Display Driver \NuPRO\NuPRO-E320\VGA\
LAN Driver \NuPRO\NuPRO-E320\Ethernet\
TPM Driver \NuPRO\NuPRO-E320\TPM\
Audio Driver \Audio Daughter Board\DB-Audio2\