ADLINK Hurricane-QM57 - Manual (Page 11)

SME-LEMT-R0V8 Revision 0.8 Page 7 of 22
4.2 The User Flash Memory Tab
Memory
For memory organization, refer to chapter 3 (Flash Memory Organization). Address and size values
are entered as hexadecimal values. Valid start addresses are multiples of 16 within the range:
0x0000-0x01F0 for 512 byte variants and 0x0000-0x03F0 for 1024 byte variants. The size can be
any multiple of 16 bytes (up to the total memory size).
Example: To display the first 32 bytes from user flash memory, enter “0000” as address, “20” (hex
20 equals decimal 32) as size and press the [Read] button. The memory content is transferred from
the SMC and displayed in the output window.