ADLINK cPCI-6625 - Manual (Page 25)

Functional Description 13
cPCI-6625
Interfaces
X Two channels of DDR3 memory with a maximum of one
SO-DIMM per channel
X Memory DDR3 data transfer rates of 1066 MT/s and 1333
MT/s
X 64-bit wide channels
X DDR3 I/O Voltage of 1.5 V
X 1Gb, 2Gb, and 4Gb DDR3 DRAM technologies are sup-
ported for x8 and x16 devices
X Using 4Gb device technologies, the largest memory capac-
ity possible is 16 GB, assuming dual-channel mode with two
x8, dual-ranked, un-buffered, non-ECC,
X SO-DIMM memory configuration
X The PCI Express port(s) are fully-compliant with the
PCI-Express Base Specification, Revision 2.0
X 5 GT/s point-to-point DMI interface to PCH is supported
X The Processor Graphics contains a refresh of the sixth gen-
eration graphics core enabling substantial gains in perfor-
mance and lower power consumption.
X DX10.1, DX10, DX9 support
X OGL 3.0 support
X FDI carries display traffic from the Processor Graphics in
the processor to the legacy display connectors in the PCH