ADLINK cPCI-6210 - Manual (Page 32)

18 Functional Description
Supported Technologies
X Intel® Virtualization Technology for Directed I/O (Intel® VT-d)
X Intel® Virtualization Technology (Intel® VT-x)
X Intel® Hyper-Threading Technology
X Intel® 64 Architecture
X Execute Disable Bit
X Intel® Turbo Boost Technology
Interfaces
X Two channels of DDR3 memory with a maximum of one
SO-DIMM per channel
X Memory DDR3 data transfer rates of 1066 MT/s, 1333
MT/s, and 1600 MT/s
X 64-bit wide channels
X DDR3 I/O Voltage of 1.5 V
X 1Gb, 2Gb, and 4Gb DDR3 DRAM technologies are sup-
ported for x8 and x16 devices
Z Using 4Gb device technologies, the largest memory
capacity possible is 16 GB, assuming dual-channel
mode with two x8, dual-ranked, un-buffered, non-ECC,
SO-DIMM memory configuration.
X The PCI Express port(s) are fully-compliant with the PCI
Express Base Specification, Revision 2.0.
X 5 GT/s point-to-point DMI interface to PCH is supported
X The Processor Graphics contains a refresh of the sixth gen-
eration graphics core
X enabling substantial gains in performance and lower power
consumption.
X DX10.1, DX10, DX9 support
X OGL 3.0 support
X FDI carries display traffic from the Processor Graphics in
the processor to the legacy display connectors in the PCH