ADLINK aTCA-6155 - Manual (Page 20)

6 Specifications
2.2 Standards and Interface
Standards • PICMG 3.0 R2.0 AdvancedTCA
• PICMG 3.1 AdvancedTCA Ethernet option 1/9
Networking • Three dual-port Intel® 82576EB Gigabit Ethernet
controllers
• Four 10/100/1000BASE-T ports (2 on face plate and
2 on Base Interface channels 1-2)
• Two SerDes ports on Zone 3 to RTM
• Dual 10GBASE-KX4 Fabric Interface Channels via
Intel® 82599EB on aDB-6100 riser card
Serial ATA • Five Serial ATA II ports from ICH10R, one onboard,
four to RTM
Serial Attached
SCSI • Four SAS ports from LSISAS1064E, one to AMC, three to
RTM
Display • ATI ES1000 graphics controller with 2D accelerator
• DDR2-533 64MB memory
• Analog RGB up to 1600x1200@75Hz refresh rate
USB • Three USB 2.0 ports on front panel, four ports to RTM
Serial • One RJ-45 RS-232 port
Storage • On-board 4GB USB NAND Flash
• AMC.3 SAS
• Four SATA and three SAS ports on RTM
Front Panel I/O • 1x VGA port (DB-15)
• 3x USB 2.0 port (Type-A)
• 1x RS-232 port (RJ45)
• 2x GbE ports (RJ45)
• 1x AMC bay (aTCA-6155A only)
• LEDs: OOS, Media, User and Hotswap
• Recessed reset button
Rear I/O • PCI-E x4 from Intel 5520
• 1x COM port
• 4x USB 2.0 ports
• 4x SATA ports from ICH10R
• 3x SAS/SATA ports from LSISAS1064E
• 2x SerDes ports