6 security setup, Security setup – ADLINK aTCA-9300 User Manual

Page 69

Launch PXE OpROM policy

This option controls the execution of UEFI and Legacy PXE OpROM.
Set this value to Do not launch / Legacy only.

Launch Storage OpROM policy

This option controls the execution of UEFI and Legacy Storage OpROM.
Set this value to Do not launch / UEFI only / Legacy only.

Launch Video OpROM policy

This option controls the execution of UEFI and Legacy Video OpROM.
Set this value to Do not launch / UEFI only / Legacy only.

Other PCI device ROM priority

For PCI devices other than Network, Mass storage or Video defines which OpROM
to launch. Set this value to UEFI OpROM / Legacy OpROM.

6.6 Security Setup

Administrator / User Password

If only the administrator’s password is set, then this only limits access to setup and
is only asked for when entering setup.

If only the user’s password is set, then this is a power on password and must be
entered to boot or enter setup. In setup the user will have administrator rights.