ADLINK aTCA-9300 - Manual (Page 62)

62
Terminal Type
VT-UTF8 is the preferred terminal type for out-of-band management. The next best
choice is VT100+ and then VT100. See above, in Console Redirection Settings page, for
more Help with Terminal Type/Emulation. Configuration options: VT100, VT100+, VT-
UTF8 , ASNI.
Bits per second
Select the bits per second you want the serial port to use for console redirection. The
options are 115200 ,57600 ,38400, 19200, 9600.
Flow Control
Set this option to select Flow Control for console redirection. The settings for this value
are None and Hardware RTS/CTS.
Data Bits
This is a display-only function providing information about the frame width for the Out-of-Band
Management.
Parity
This is a display-only function providing information about the parity for Out-of-Band Management.
Stop Bits
This is a display-only function providing information about the number of stop bits for Out-of-Band
Management.
6.3.7 Network Stack
You can use this screen to specify options for the Network Stack settings.
The screen is shown as below.