ADLINK aTCA-9710 - Manual (Page 61)

61
6.3.5 Network Stack Configuration
You can use this screen to select options for the Network Stack Configuration. Use
the up and down < Arrow > keys to select an item. Use the < + > and < - > keys to
change the value of the selected option. A description of the selected item appears
on the right side of the screen. The settings are described on this page. The screen is
shown below.
Network Stack
Enable/Disable UEFI Network Stack.
Set this value to Enabled / Disabled.
IPv4 PXE Support
Enable Ipv4 PXE Boot Support. If disabled IPV4 PXE boot option will not be created.
Set this value to Enabled / Disabled.
IPv6 PXE Support
Enable Ipv6 PXE Boot Support. If disabled IPV6 PXE boot option will not be created.
Set this value to Enabled / Disabled.
PXE boot wait time
Wait time to press ESC key to abort the PXE boot.
Set this value to integer.