5 software installation – ADLINK C485 User Manual
Page 34
28
• Installation
2.5
Software Installation
2.5.1
Windows NT Installation
Once Windows NT system has been started, login using an account with
administrative right.
1.
Start the [Control Panel] applet by double clicking the icon in the
[Program Managers] main group
2.
In the [Control Panel] applet, double click [Network] icon to bring up
the Network Control Panel Applet (NCPA).
3.
Within the NCPA, select the [Add Adaptor] button, a list of possible
adaptors should be displayed. Go to the end of this list and select
4.
When prompted for the path, specify the drive and directory where
the NCPA can find the new driver for the card you install.
For C514, we may specify as follow:
X:\NuCOM\C514518\P514\NT4
For C584, we may specify as follow:
X:\NuCOM\C584588\P584\NT4
For C518, we may specify as follow:
X:\NuCOM\C514518\P518\NT4
For C588, we may specify as follow:
X:\NuCOM\C584588\P588\NT4
For C485, we may specify as follow:
X:\NuCOM\C584588\P584\NT4
For C888/C960/C990/C990D, we may specify as follow:
X:\NuCOM\C9x0888\Nt4