3 installation procedure – ADLINK C485 User Manual
Page 32
26
• Installation
2.3
Installation Procedure
1.
Turn off your computer
2.
Turn off all accessories (printer, modem, monitor, etc.) connected to
computer.
3.
Remove the cover from your computer.
4.
Select a 32-bit PCI expansion slot.
Caution! Don‘t put PCI card into ISA or EISA slot.
5.
Before handling the serial communication card, discharge any static
buildup on your body by touching the metal case of the computer.
Hold the edge and do not touch the components.
6.
Position the board into the PCI slot you selected.
7.
Secure the card in place at the rear panel o f the system unit using
screw removed from the slot.
This manual is related to the following products: