ADLINK C485 User Manual

Page 30

• Software Installation

The card with the “ON” jumper will have lower COM port number.
The card with the “OFF” jumper will have its COM port number
subsequently following the “ON” card.

3. We suggest users set the jumper “ON” for the first card to be

installed in one system.

4. PCIPORT card can be used in interrupt shared modes. The PCI

BIOS will assign IRQs for each PCIPORT card. For
multi-PCIPORT applications, users can just share one IRQ for
each card. Users must confirm that the system has at least one
free IRQ Plug and Play.

For multi-PCIPORT card installation, note the following:

1. To install two of the same PCIPORT cards in one Linux system,

set one card's jumper to “ON” and the other to “OFF”.

2. PCIPORT card can be used in interrupt shared modes. The PCI

BIOS will assign IRQs for each PCIPORT card. For
multi-PCIPORT applications, users can just share one IRQ for
each card. Users must confirm that the system has at least one
free IRQ Plug and Play.

This manual is related to the following products:

C422