ADLINK PCI-C588/PCIe-C588/C584 - Manual (Page 41)

Installation
• 35
9. From this procedure, the screen message and installation
procedure will be different for XENIX and UNIX system.
In XENIX system:
Re-linking the kernel.
Kernel with driver m odifications is in /usr/sys/conf/xenix
Do you want this kernel to reboot by default? (y/n) y
The new kernel is installed in /xenix.
Reboot your system to activate it.
#
In UNIX system:
The UNIX operating system will now be rebuild.
This will take a few minutes. Please wait.
The UNIX Kernel has been rebuilt
10. At sight of the above message, you can assure that you have
finished your installation. At this moment, please shutdown the
operating system and reboot it.
After restarting the new kernel, the IO processor will indicate as follows:
PCIIOP: unit = 0 type = P960F bus = 0 dev = 0 fun = 0 map = 0xF4000000 :
8KB
.
.
.
.
Downloading PCIIOP card(s) ……
PCIIOP: unit = 0 type = P960F dram = 0MB ports = 8 (F641)
.
.
.
.
Here:
“unit =” denotes the installation card number in the system.
“type =” denotes the PCIIOP interface card type.