ADLINK PCI-C588/PCIe-C588/C584 - Manual (Page 28)

16
• Software Installation
NOTE: Error messages:
“PCIPORT & INDPORT Already Install.”
====>The driver had been installed.
“Please check 'JP1' in the C588 or C584.”
====>Cards have same jumper JP1 setting.
“PCIPORT not in system.”
====> PCIPORT card is not inserted in the PCI slot.
For multi-PCIPORT card installation, note the following:
1. Up to eight cards can be installed in one DOS system. Each type
of cards must have a different jumper setting (and card number).
2. The PCIPORT driver function call description can be found in the
DOS driver diskette. DEMO programs are also included and may
be modified to meet application requirements.
3. Please note the card number for each card.