ADLINK EOS-4000 - Manual (Page 19)

Introduction 7
EOS-4000
Table 1-1: Front Panel I/O Connector Legend
1.5.1 LED Indicators
In addition to an LED on the power switch, two LEDs on the front
panel indicate as follows..
Table 1-2: LED Indicators
1.5.2 Power Switch
The power switch is non-latched, with a blue LED indicator. Sys-
tem is turned on when the button is depressed, and the power
LED lights. If the system hangs, depressing the switch for 5 sec-
onds turns the system off completely.
1.5.3 Reset Button
The reset button executes a hard reset.
1.5.4 PS/2 Connector
The EOS-4000 provides connectors for PS/2 keyboard and
mouse, either singly or with a Y-cable to connect both at the same
time.
G
USB 2.0 connectors x4 (Type A)
H
USB3.0 connector (Type A) x2
I
CFast connector (push-push,type II)
J
Camera Link port LED indicators
K Camera Link port x2
L
32 channel isolation DIO connector
LED indicator Color Description
Diagnostic Yellow
X
If lit continuously, indicates no
physical storage is connected
X
If blinking, indicates no mem-
ory is installed on either
SO-DIMM socket
HDD Green
When blinking, indicates the SATA hard
drive is active