ADLINK PXIS-2630 Series - Manual (Page 19)

Troubleshooting • 13
4
Troubleshooting and
Preventative Maintenance
4.1 Troubleshooting the PXIS-2630 series
Please refer to Table 4.1 to troubleshoot the PXIS-2630 series chassis.
The table lists possible causes for power failure and recommends ways to
correct the problem.
Table 4.1 Troubleshooting
Possible Cause What to Do
PXIS-2630 series is not
connected to power
source. Make sure that the PXIS-2630 series is
connected to a live electrical outlet. Try
operating another piece of equipment from this
outlet.
Power switch is not
switched on. Make sure the power switch is set to the ON
position.
Power supply has failed. Contact ADLINK for repair.
The Alarm Buzzer is
beeping Push Alarm RST button to stop beeping and
refer to Chapter 2.3 to find out which alarm
occurs.
Temperature LED flashes:
Cool down the PXIS-2630 system
under 50
°C.
Fan LED flashes:
Refer to Chapter 4.4 for the fan hot-
swap replacement.