ADLINK PXIS-2700 - Manual (Page 36)

30 ● Pin Assignments
SAFETY INSTRUCTIONS
Read and follow all instructions marked on the product and in the
documentation before you operate your system. Retain all safety and
operating instructions for future use.
1. Please read these safety instructions carefully.
2. Please keep this User‘s Manual for later reference.
3. The equipment can be operated at an ambient temperature of
40ºC.
4. Two AC Inlets provided and service as Disconnect Devices,
disconnect the equipment from both AC outlets use these AC Inlets
before servicing or clearing. Use moisture sheet or cloth for cleaning.
5. For pluggable equipment, that the socket-outlet shall be installed near
the equipment and shall be easily accessible.
6. Place the power cord such a way that people can not step on it. Do
not place anything over the power cord.
7. If the equipment is not use for long time, disconnect the equipment
from mains to avoid being damaged by transient overvoltage.
8. Make sure the voltage of the power source when connect the
equipment to the power outlet.
9. All cautions and warnings on the equipment should be noted.
10. Please keep this equipment from humidity.
11. Do not use this equipment near water or a heat source.
12. Lay this equipment on a reliable surface when install. A drop or fall
could cause injury.
13. Never pour any liquid into opening, this could cause fire or electrical
shock.
14. Never open the equipment. For safety reason, the equipment should
only be opened by qualified service personnel.
15. If you use ADLINK PXI-3710 or PXI-3710F as the PXI controller,
there is a Lithium Battery provided in the PXI-3710/3710F for real
time clock. Please contact
ADLINK for replacing.
“
CAUTION – Risk of explosion if battery is replaced by an
incorrect type. Dispose of used batteries according to the
instructions.”
16. If one of the following situations arises, get the equipment checked by