ADLINK PCM-6308V+ - Manual (Page 3)

2.5 Input Signal Setting
The PCM-6308V+‘s voltage output channels can be configured as different voltage range. Each
output channel and its corresponding jumpers are listed as follow.
Channel
NO.
Corresponding Jumper
For output mode
(Unipolar/Bipolar)
Corresponding Jumper
For reference voltage
sources (external/internal)
CH0 JP1 JP9 JP11
CH1 JP2 JP9 JP11
CH2 JP3 JP9 JP11
CH3 JP4 JP9 JP11
CH4 JP5 JP10 JP12
CH5 JP6 JP10 JP12
CH6 JP7 JP10 JP12
CH7 JP8 JP10 JP12
The output range is dependent on D/A converter's reference voltage source and output mode
(Bipolar or Unipolar). The JP11 and JP12 are used to set reference voltage sources comes internally
or externally. The external reference voltage input (ExtVref) is on the connector CN1. The JP1~8 and
JP9/10 set the output mode to be unipolar or bipolar.