ADLINK PCM-6308V+ - Manual (Page 2)

2 Installation procedures for PC/104 plus DAQ modules:
2.1 what you have
In addition to this appendix, the package includes the following items:
♦
PCM-6308V+ DAQ modules
♦
Manual & Software Utility CD-ROM
If any of these items is missing or damaged, contact the dealer from whom you purchased the
product. Save the shipping materials and carton in case you want to ship or store the product in the
future
2.2 unpacking
Your PCM-6308V+ card contains sensitive electronic components that can be easily damaged by
static electricity
The card should be done on a grounded anti-static mat. The operator should be wearing an
anti-static wristband, grounded at the same point as the anti-static mat.
2.3 layout of modules
2.4 PCI configuration
A rotary switch on PCM-6308V+ is used to switch the appropriate CLK, IDSEL, INT, REQ and GNT
signals from PCI bus. For example, when PCM-6308V+ card is plugged as the closest position to
PC/104plus motherboard, the switch must be set to 0 or 4.
Rotary Switch
Position
CLK IDSEL INT REQ GNT
0 or 4 CLK0 IDSEL0 INTA REQ0* GNT0*
1 or 5 CLK1 IDSEL1 INTB REQ1* GNT1*
2 or 6 CLK2 IDSEL2 INTC REQ2* GNT2*
3 or 7 CLK3 IDSEL3 INTD REQ2* GNT2*
* only for Bus Masters card
Top View Bottom View Rotary Switch
PC104+ connector
PC104 connector
CN1
CN2
JP1~JP1