Denon DN-C635 - Manual (Page 15)

15
ENGLISH
Parallel remote
Parallel remote
Parallel remote
Parallel remote
Serial remote
Play mode
Cascade
RC cord
IR remote
Stereo/Mono
Play list (MP3)
Preset clear
Set information
Selection of whether or not to accept parallel remote
signals.
Selection of whether or not to output standby tally.
External control tally output signal setting.
Fader start mode selection.
Serial remote (9P D-Sub) setting.
Setting of play mode when power is turned on.
Selection of whether or not to output cascade signal.
RC cord setting.
Infrared remote control sensor setting.
Selection of stereo or monaural playback.
Setting of whether or not to perform the play list.
Setting for clearing presets and setting them to the initial
values.
Microprocessor version display.
Remote ENA
ST. Tally ON
INDEX 2 Tally
Fader Pause
RS 232C
Play SINGLE
Cascade OFF
RC DENON
IR OFF
Stereo
Play List OFF
Ini. Preset
Ver. **** (* = number)
21
22
23
24
25
26
27
28
29
30
31
32
33
Preset function type Description
Set upon shipment
from factory
No.
(2) Presetting procedure
1 Press the STOP ( 2 ) button u for approximately 2 seconds while in the stop mode.
2 Turn the select knob !0 and select the preset item.
3 Press the select knob !0 to change the setting.
4 The preset mode is canceled when the STOP ( 2 ) button u. The setting are writeen at this time.
(3) Detailed Description of Preset Functions
(* = initial setting)
0 1) “Preset Type (*)” (Three different sets (types) of presettings can be made and used for different purposes.)
*01:P No=1 : Set to preset type 1.
* 01:P No=2 : Set to preset type 2.
* 01:P No=3 : Set to preset type 3.
0 2) “Finish Mode”
* 02:Fin=Stop : Stop mode is set after playback ends.
*02:Fin=Next : Standby mode is set at next track after playback ends.
* 02:Fin=Rcue : Standby mode is set at playback start position after playback ends.
0 3) “Power On (****)”
*03:P On=Stb : Standby mode is set at specified track after TOC is read.
* 03:P On=Ply : Playback begins in the all repeat mode after TOC is read.
* 03:P On=Stp : Stop mode is set after TOC is read.
0 4) “CueDet. Level”
*04:CDet.=–** : Set the audio detection level for cueing. (*–48 / –42 / –36)
* 04:CDet.=OFF : Sound startup position is not cued.
0 5) “Sleep ON (OFF)”
*05:Sleep=** : Automatically turn the servo functions off if no button is operated for ** minutes in
the pause, standby or manual search mode. (1 / 2 / 5 / 10 / 15 / *30)
* 05:Slp=OFF : Do not automatically turn the servo functions off.
0 6) “Program 1 OFF (ON)”
* 06:Prg 1 : Store the contents of program 1 when on. (Initial setting - OFF)
0 7) “Progam 2 OFF (ON)”
* 07:Prg 2 : Store the contents of program 2 when on. (Initial setting - OFF)
0 8) “Program 3 OFF (ON)”
* 08:Prg 3 : Store the contents of program 3 when on. (Initial setting - OFF)
0 9) “End Mon (**) s”
*09:EndM (**) s : Set the end monitor time. (5/*10/15/20/25/30/35)
* 09:EndM OFF : Do not use the end monitor function.
10) “EOM Time”
*10:EOM=**s : Set the EOM time. (0 / 5 / *10 / 15 / 20 / 30 / 60)
* 10:EOM=OFF : Do not use the EOM function.
11) “Next Standby”
*11:NStb=OFF : Return to the play start position and standby when the CUE button is pressed during
playback.
* 11:NStb=ON : Standby at the beginning of the next track when the CUE button is pressed during
playback.
12) “Next Track Reserve”
*12:Rsv=OFF : Specified track is searched for immediately when select knob is turned during
playback.
* 12:Rsv=ON : Track to be searched for is scheduled after playback of current track ends when select
knob is turned during playback.
13) “CD Pitch”
*13:Pit=Norm : Play at normal speed.
* 13:Pit=+/–*.* : Play at variable speed.
±(0.2 / 0.4 / 0.6 / 0.8 / 1.0 / 1.2 / 1.4 / 1.6 / 1.8 / 2.0 / 2.2 / 2.4 / 2.6 / 2.8 / 3.0), 0Fix
14) “Delay OFF (***ms)”
*14:Dly=OFF (***ms) : Set the time for delayed start after the play start operation. (*OFF/100 m/200 m/300 m)
15) “Panel Lock ON/OFF”
*15:Pane=OFF : Enable operation of all the buttons on the front panel.
* 15:Pane=ON : Inhibit operation of all panel buttons other than those use for presetting operations
and OPEN/CLOSE button.
16) “Play Lock”
* 16:Play=ON : Inhibit all operations other than the 3 , TIME, PLAY MODE, FOLDER and TITLE
buttons during playback.
*16:Play=OFF : Enable all functions during playback.
17) “Eject Lock ON/OFF”
* 17:Ejec=ON : The OPEN/CLOSE button is locked during playback.
*17:Ejec=OFF : The OPEN/CLOSE button is not locked during playback.