beautypg.com

Care and maintenance, Neutral adjustment – Dixon 2003 User Manual

Page 50

background image

50

CARE AND MAINTENANCE

NEUTRAL ADJUSTMENT:

1.

Engage parking brake and raise rear of frame with

jack or blocks so that rear tires do not contact the

ground.

2.

Swing out the control levers, start the engine, and

release the paking brake.

3.

Raise the upper body to access hydro control linkage.

If right wheel creeps, adjust right side linkage and

vice-versa. Use procedure below.

a. loosen, but do not remove, the bolt in

the control tube (5540)

b. loosen jam nuts on ends of the control

rod (9067)

c. turn control rod in or out until neutral

is achieved

d. tighten jam nuts on control rod

e. tighten bolt in control tube