beautypg.com

Care and maintenance, Changing the engine oil – Dixon 2003 User Manual

Page 38

background image

38

Hex Head Valve Stem

Hot oil may cause burns. Allow

engine to cool before draining oil.

CAUTION

CARE AND MAINTENANCE

CHANGING THE ENGINE OIL:

1.

The “Dapco” oil drain valve is located on the right

side of the engine crankcase on the 5004 &

5005 and on the left side of the engine crank-

case on the 5023.

2.

Place a suitable container under the drain valve.

The fitting of a short piece of hose will help direct

the oil.

3.

To drain, turn hex head valve stem counter--

clockwise with 10mm wrench or socket. Open

to full open (approximately 7 turns).

4.

After engine is drained, tighten hex stem.

NOTE: Refer to engine manufacturer’s recommendations

for frequency of oil changes.

See also other documents in the category Dixon Gardening equipment: