beautypg.com

Controls, Mower deck cut height lift lever, Blade drive – Dixon 2003 User Manual

Page 19: Circuit breaker

background image

19

CONTROLS

MOWER DECK CUT HEIGHT LIFT LEVER:

Located to the right and front of

operator.

Controls the cutting height.

Seven positions of adjustment.

Depress trigger and move lever forward

to lower deck.

Depress trigger and pull lever back to

raise deck.

NOTE: Always use high position for transport.

BLADE DRIVE:

Located on control panel to

operator’s right.

To engage blade: Pull up on switch.

To disengage blade: Push down.

CIRCUIT BREAKER

:

Located on control panel to

operator’s right.

Protection of the electrical system

is by (1) 15 amp circuit breaker.

If circuit breaker trips, push button

to reset.

If this condition repeats, consult

dealer for inspection and repair.