Acrosser AR-B1790 - Manual (Page 29)

28
Internal Graphics Mode Select
- Shares 512K/1MB/8MB of the system memory in DOS mode
- Uses Dynamic Video Memory Technology (DVMT) in Windows mode
USB Controller
This option can enable USB Port 0&1or Disabled USB function.
USB1.1 Device Legacy Support
These options are used to Enabled the USB function and it’s only useful in the DOS mode. The USB function sets
Enabled
will occupy IRQ10.
Boot Display Device
Use the field to select the type of device you want to use as the display(s) of the system. Setting options: CRT,
LF
P,CRT+LFP. The option EFP refers to the LCD display.
Flat Panel Type
800 X 600 LVDS
1024 X 768 LVDS
1280 X 1024 LVDS
1400 X 1050 LVDS
1600 X 1200 LVDS
5.5 POWER MANAGEMENT
This section is used to configure power management features. This option allows
you to reduce power consumption. This feature turns off the video display and shuts down the hard disk after a
period of inactivity.
Power Management
Keyboard PowerOn Function
This parameter allows you to use specific keys on the keyboard to turn on the system. This feature requires an
ATX power supply that provides at least 1A on the +5VSB lead. Configuration options: [Disabled] [Any Key]
[Specific Key]
Specific Key For PowerOn
[Enter]