Acrosser AR-B1042 - Manual (Page 21)

AR-B1042 User¡ ¦s Guide
3-3
3.4 SUPPORTED LCD PANEL
At present, this VGA card can provide the total solution with inverter board for the following list of standard LCD
panel using the PC/104 VGA module (AR-B1042). Consult your Acrosser representative for new developments,
when using other models of standard LCD panels in the market.
NO. Manufacture Model No. Description
1 NEC NL-6448AC30-10 TFT 9.4”
2 NEC NL-6448AC32-10 TFT 10.2”
3 NEC NL-6448AC33-10 TFT 10.4”
4 HITACHI LMG5371 MONO 9.4” Dual Scan
5 HITACHI LMG9200 DSTN 9.4”
6 HITACHI LMG9400 DSTN 10.4”
7 ORION OGM-640CN03C-S DSTN 10.4”
8 SHARP LQ10D321 TFT 10.4”
Table 3-1 LCD Panel Type List
CAUTION: If you want to connect the LCD panel, must update the AR-B9622’ s BIOS, then you can setup the
correct BIOS. Please contact the Acrosser who will provide the utility for this function.
3.5 INVERTER BOARD DESCRIPTION
The inverter board is the one that supplies the high voltage signals to drive the LCD panel by converting the 12 volt
signal from the AR-B1042 into high voltage AC signal for LCD panel.
It can be installed freely on the space provided over the VR board. If the VR board is installed on the bracket, you
will have to provide a place to install the inverter board into your system.