Acrosser AR-B1042 - Manual (Page 9)

AR-B1042 User s Guide
1-3
1.3 AR-B1042 AND ACCESSORY LIST
The AR-B1042 is a PC/104 form factor supports VGA controller for CRT or LCD display, it is very suitable for
different types of monitors like the CRT monitor, STN, Dual-scan, TFT, Monochrome and color panels. With
512KB (or 1MB) of RAM on board, it allows a maximum CRT resolution of 1024x768x256 an LCD resolution of
640x480x64K colors. It can be connected to create a compact video solution for industrial environment.
AR-B1042 in its standard package can be used with CRT monitor through the 15-pin D-Sub connector provided for
interface. AR-B1042 VGA module is also available is an enhanced package for CRT/LCD display, it contains the
standard package, plus additional accessories for using LCD flat panel display. Below table shows the list of
accessories including for both packages provided for AR-B1042 VGA module.
Description AR-B1042 for CRT
(Standard)
AR0B1042 for LCD/CRT (With
Enhanced Accessories)
Interface
Provided
CRT Connector (DB-15)
PC/104 Standard Bus
CRT Connector (DB-15)
PC.104 Connector Bus
LCD panel Interface
Accessory Driver Diskettes LCD Panel Adjust VR Board
LCD Panel Inverter VR Board
Parts Package
Driver Diskettes
Table 1-3 Standard Display
1.4 FEATURES
The system provides a number of special features that enhance its reliability, ensure its availability, and improve its
expansion capabilities, as well as its hardware structure.
z IBM-VGA hardware compatible
z Supports CRT color monitors and STN, TFT, Dual-Scan STN, monochrome and color panels
z CRT resolution up to 1280x1024x16 colors
z LCD resolution up to 640x480x64K colors
z Windows performance improvement features
z Chips and Technology F65545 Chipset
z Simultaneous CRT and LCD operation
z Operating temperature 0 degree C to 70 degree C
z Up to 95% Humidity non-condensing
z PC/104 form-factor (92x97mm/3.6”x3.8”) on a 4-layer PCB