Acrosser AR-B1565 - Manual (Page 40)

AR-B1565/1565A User’s Guide
39
Onboard Serial Port 1,2,3&4
These options are used to select the port address of the on-board serial port A. The options are 3F8H, 2E8H,
2F8H, 3E8H, Auto and Disable.Port four can be set to be IrDA (Choose Auto) if the IrDA device has been
connected.
Onboard Parallel Port
This option is used to select the port address of the on-board parallel port. The options are 378H, 278H, 3BCH,
and Disabled.
Parallel Port Mode
This option specifies the parallel port Mode. The settings are Printer or Extended (Bi-direction).
MULTIPLE MONITOR SUPPORT
This is to determine the highest priority that the monitor supports. is the default setting. The other two
choices are and .
5.8 POWER MANAGEMENT SETUP