Specifications, 2 packing list, 1specifications – Acrosser AR-B1651 User Manual
Page 6: 1 specifications
AR-B1651 User’s Guide
1.1 SPECIFICATIONS
CPU: On-board VIA C3 Processor 800MHz or Eden 667 MHz Process
DMA channels: 7
Interrupt levels: 15
Chipset: VIA ® Apollo PLE133T ( VT8601T Integrated 2D / 3D graphics accelerator and VT82C686B)
RAM memory: Supports SDRAM PC133, on-board 144-pin SO-DIMM up to 512MB SDRAM memory
module
VGA Controller:
Embedded VGA controller, Screen Resolution: up to Ture Color(32 bit)1024x768, or High
Color(16 bit) 1280x1024.
Display Interface: CRT – D-SUB 15-pin female connector
LVDS – for 18 bit TFT LCD Panel, 2x13x2.00mm pin-header connector
Ultra ATA/33/66/100 IDE Interface: One PCI Enhance IDE channel. The south bridge VT82C686B supports
Ultra ATA/33 IDE interface. To support Ultra ATA66/100 Hard disk, a specified cable must be available.
Floppy disk drive interface: 2.88 MB, 1.44MB, 1.2MB, 720KB, or 360KB floppy disk drive.
C. F.: Supports Compact Flash Type I interface
Series ports: On-board one D-SUB 9-pin male connector for COM1 with RS-232C /RS-485 .On-board one
2x5x2.00mm pin-header connector for COM2 with RS-232C share with Touch Screen
Touch Screen uses 2.0mm 3-pin header connector
Parallel Port: On-board one 2x13x2.00mm pin-header connector for Parallel port, supports SPP/EPP/ECP
modes
IrDA port: Supports IrDA (HPSIR) and ASK (Amplitude Shift Keyed) IR port multiplexed on COM2.
USB port: On-board one 2x5x2.00mm pin-header connector for 2 USB ports
Audio: onboard AC’97 Codec, On-board one 2x13x2.00mm pin-header for Audio interface Supports two
channel Left/Right Line IN/OUT, and Left/Right speaker out, MIC IN, CD IN.
Watchdog timer: Software programmable 1~63sec.
Ethernet: On-board one Realtek RT8100B, supports 10/100Mbps Base-T with RJ-45 connector built-in LED
K/B & Mouse: On-board PS/2 Keyboard and Mouse connector
Power Req.:
+5V 2A and +12V 1A maximum
PC Board: 8 layers, EMI considered
Dimensions: 145mm x 102mm (5.7” x 4”)
Operating Temperature: 0
° ~ 60
1.2 PACKING LIST
These accessories are included with the system. Before you begin installing your AR-B1651 board, please make
sure that the following items have been included inside the AR-B1651 package.
The quick setup manual
1 AR-B1651 CPU board
1 Hard disk drive adapter cable for 3.5” hard disk
1 Floppy disk drive adapter cable
1 Software utility CD
1 RS-232 and 1 PS/2 Mouse & Keyboard interface cable mounted on bracket
1 Parallel port adapter cable mounted on one bracket
6