Acrosser AR-B5631 User Manual
Page 28
Revision: 1.0
28
Set Password
Pressing
for confirmation:
ENTER PASSWORD:
When a password has been enabled, you
will be prompted to enter your password
every time you try to enter Setup. This
prevents unauthorized persons from
changing any part of your system
configuration.
Type the password, up to eight characters
in length, and press
typed now will clear any previous password
from the CMOS memory. You will be asked
to confirm the password. Type the
password again and press
may also press
and not enter a password.
To disable a password, just press
when you are prompted to enter the
password. A message will confirm that the
password will be disabled. Once the
password is disabled, the system will boot
and you can enter Setup freely.